Sew Simple Ipad/Tablet Case

Ipad's, Tablets, e-readers they seem to be everywhere. They come in so many different shapes and sizes and the cases that are available are typically only made for 2 or 3 sizes. So lets make a super simple, but oh so cute multi-use case for whatever you have. This case can be completed with just one piece of fabric, so feel free to splurge (a little) on the fabric of your choice. :-)

What you need:
                            Pre-quilted material (1/2 yard)
                            Matching Thread
                            Large Button
                            Dimensions of the item you want to create your case for
                                   ex:) Tablet  Height: 11", Width: 8", Depth 1/2"

* To determine the dimensions for your specific case take your width add 2 inches and this is your width of the case, then take your height double it and add 2 inches.

Height of Case = height of e-reader + 2 inches

Then make a point at the top - it really doesn't need to be perfect just close

See my example below 

 *Note this is one piece of fabric*

With right sides facing in, fold your fabric in half up to the triangle base (see picture in Red for an example)

Start at the top and stitch along the side of the fabric using a 1/4 inch guide on your sewing machine

Leave 1/2 inch at the bottom unstitched

           

With your non-stitched bottom - fold it flat so that it is now perpendicular to side stitch

(This will create the effect of a flat bottom)

 Stitch along this seam

*Flip your case right side out*

Add a button hole near the top point of your case

Add a button of your choosing  to the front of your bag

I lined my bag, but you can finish your edges with double fold bias tape or with a Serger.

Finished Bag!

Thanks for reading, please let me know if you have any questions.
                                                                      Em